All Faucet Parts Names And Brands That Every Handyman Should Know

Before you buy any faucet parts, you need to consider multiple factors like the handle clearance, metal washer requirements, price of fixtures, water flowing speed, installation-related costs, and the cost to replace the valve.

Kitchen faucet parts like head, valves, metal washers, nuts, and bolts are extremely important in the plumbing world. The assembly of the kitchen faucet parts will vary slightly if you require both hot and cold water.

A faucet is nothing but the tap fitted in the washrooms or kitchens or anywhere for water. So, a good faucet gives an entirely different feeling and makes water smoother on your skin. Proper installation and plumbing are extremely important otherwise you may need to replace multiple parts or the entire kitchen faucet assembly.

Read on for some of the most important parts of a kitchen faucet before you make a decision.

Kitchen Faucet Parts Names

Finding a faucet is not that tough if you know the names. But if you are not familiar with the names, what will you look for while browsing through options? Therefore, it is important to understand the names of the different parts of the faucet.

Adjusting ring is basically a seal that is made of various different materials and plays a very important role to ensure that they are watertight.

Aerator is little mesh screens used to manage the current of water into several small streams at the base of faucets.

Cold water supply is the part that allows the cold water from the system to flow out.

Compression couplings are used for connecting two pipes.

Escutcheon is a flat pipe used to protect the hole of the pipe or valve. It is an important part of the kitchen faucet.

Faucet body is that part of the faucet which helps in transporting water from the plumbing system.

Faucet lever is used to turn that tap on and off. A separate hole may be required to install it based on certain circumstances.

Hose guide is a commonly used pipe or tube to direct water.

Hot water supply is similar to the cold water supply.

Mounting nut is designed to help with securing the faucet to the sink.

Shut-off valves are used to cut the water supply to taps. These valves play a crucial role in operating the kitchen faucet. The valve makes for an important part of the entire kitchen faucet assembly.

Spout assembly is a part used to control the spout.

Spout is the hole from where water comes out.

Spray hose is the part that connects the water supply to the faucet.

Sprayer is used to spray water around the sink. The sprayer can be operated with the help of a handle.

Washer is used to connect the aerator to the faucet stem and is made of metal or rubber.

Shower Faucet Parts Names

There are basically eight parts in the shower and you must already be familiar with most of them. If you have opened your bathroom shower ever to clean it or repair it, then must have seen these distinct parts.

But if there is any part you don't know about, then don't worry because we will help you get to know about them in detail. Here you go:

Enclosure is another part of the shower that is clearly visible and is of different shapes like squares and circles as well.

Hot and cold water pipes are made of galvanized steel and sometimes for them, there is a different outlet. However, most of the time, it's the same at the end of it but the origin is different.

Shower cartridges and handles are important because they control the flow and temperature of the water. Both the factors totally depend on the user as to which side he is rotating the tap more.

Shower drain strainer is a portion of the shower drain cover that keeps undesired particles like hair, soap shards, and grime out of the drain.

Shower head is used to connect a water pipe with a steel hose and it is the part that is completely visible.

Shower pan is one of the most essential parts of the shower and is important to control leakage.

Shower valves are responsible for controlling the water supply to the showerhead.

Trap and drain pipe is in the ‘s’ shape and if it is installed properly, it will help in preventing the flow of harmful substances and other unwanted elements.

Bathroom Faucet Parts Names

There are different types of bathroom faucet parts and you would want to know about them before buying them for your home. This will help you make an informed and wiser decision. So, have a look at them with our comprehensive list of bathroom faucet parts names: -

Bridge looks exactly like a bridge when you see it, supporting the tap faucet stands tall and straight.

Center set is one of the most commonly found faucets in homes and even at hotels. This part has one tap and two-handle faucets.

Deck mount bathroom faucet is often seen attached on large bathtubs and they are set on the rim of the bathtub, giving a really beautiful look.

Single handle is generally found in washrooms of malls and hotels. It has just one handle and using this part, you can easily set the temperature of the water.

Spread fit uses three different faucets and takes more space on the surface but looks more aesthetically pleasing.

Sprinkle does not use the traditional spout but has a different rectangular spout and the flow of the water is completely different.

The freestanding tub faucet is a tall faucet near the bucket and looks like a slim steel stick from far away.

Tub wall mount bathroom faucets are really big, large, and heavy, which is enough to break the floor if it falls someday, and has a shower option too.

Bathtub Faucet Parts Names

The best part of any washroom is the bathtub. If you have it orplanning to install one, then you'll surely understand its importance. But it is a high-maintenance bathroom accessory as well. So, you should know what parts it has. Here you go:

Decorative panel is basically the tiles and stones that cover your floor, tub, and other parts of the bathtub and gives a completely different look to the setup which makes it more aesthetically pleasing.

Diverter pipe is basically a pipe or equipment which is used to divert the water flow and focus it in one area.

Drain is another very important part to drain the water once you have had a bath and it is fitted on the floor of the tub in one corner where the whole tub is inclined.

Overflow pipe is placed between your connectors and the drain, collects all of the surplus water, and directs it to your drain through a different line.

Planar cross is usually installed only in the bathtub and is used to control the flow of water. Also, it is used to connect the diverter pipe, hot and cold water pipe, and the rim of your drain.

Shower is not there in a few faucet designs for bathtubs but if there is one, then it is directly connected to the water supply.

Tub is itself a part without which there is no bathtub and it's kind of a big vessel which holds water and in which you slide in.

Water supply is the most important factor that has two more parts for cold and hot water respectively. It is connected from the floor in most of the cases.

Faucet Brand Names

Finally, everything comes down to the brand of the faucet that is being used because that determines its performance, quality, and the flow of water. Moreover, it will also play an integral part in deciding after-sale service of the faucets. So, don't make a mistake while choosing the brand because it's a one-time investment only.

You don't buy it every day. So, here are some brand names that you would want to have a look at. Here you go:

Delta faucet is another big player in the market that was founded in 1929 but it is a subsidiary of Masco. The company also manufacture the parts, therefore, they have the benefit of the expertise.

Grohe was founded by Friedrich Grohe in 1936, and instead of being an American company, it is a German company. It is one of the best companies with decent after-sale service.

Kohler was founded by John Michael Kohler in 1873 and is an American manufacturing company situated in Kohler only. Also, it is a family business that carries a legacy of providing good products in the market.

Kraus is not so old and is a relatively new company with 50+ designs on its name and is more often seen in the kitchen and deals in both traditional and modern designs.

Moen was founded by Alfred Moen in America in 1956 and is one of the best companies because of its experience in this industry. The company was awarded as the Most Trusted Brand in America.

Peerless is an economic brand that promises good designs but also wants to keep a check on their buyers' pockets. Its products are generally brought on contracts by home designers and property dealers.

Pfister was founded by Emil Price and William Pfister in 1910 and is again an American company. It is one of the oldest companies existing until now which clearly tells why it is one of the best companies.